ATV-UTV

MAKE SURE YOU HAVE THE PROPER BELT REMOVAL/COMPRESSION TOOL FOR YOUR DRIVEN CLUTCH

167-20217

This tool is for driven clutches that measure 3.6'' (91.5mm) from roller cutout to roller cutout.

Unique shape with cam over design

167-20306

This tool is for driven clutches that measure 3.1'' (78.9mm) from roller cutout to rooler cutout ( NOTE: when looking straight on with the clutch you can see the roller pin hole. This tool is also the proper tool for models with the square slider block.

Belt removal/clutch compression tool This tool makes belt removal and replacement a breeze. Machined from billet aluminum for strength and durability, this tool has a specially shaped end that cams over when fully engaged in the driven clutch. This allows the tool to remain engaged in the clutch (compressing the clutch) while the old belt is removed and the new belt is replaced. Also, this tool has a wide footprint and because it is made of aluminum it doesn't tend to mar the clutch in the contact area like other tools used for this purpose. On the opposite end, this tool has a wedge shape that allows its use to compress the drive clutch (with belt removed). It is intended to be used in conjuction with our sheave clamp tool. Simply compress the drive clutch, slide the sheave clamp tool. Now you can easily change or service the drive clutch weights, or inspect the roller condition without having to remove the clutch from the machine, or spring from the clutch.

167-20306

All models with square block sliders.

167-20217 167-20302 167-20306 167-20307

3.6",91.5mm roller cutout to roller cutuot distance Combo set 160-20217+167-20225 with clamp 3.1",78.9mm roller cutout to roller cutuot distance Combo set 160-20306+167-20225 with clamp

Universal heavy duty flywheel puller for all models Pull those tough flywheels with ease with this SLP built puller. Strong and built to last for years. This puller is designed with specially shaped slots that allow its use on all twostroke snowmobile flywheel bolt patterns. Puller includes six 6mm high quality grade 10.9 bolts, and four 8mm.

Extension spring hooks Special tool made for installing and removing all exhaust system springs or any spring that requires a pull to release. Made of stainless steel for strength and rust resistance. 4”, 6”, 8” or 12” extended reach.

167-2089 167-2090 167-20183 167-20210

4” 6” 8”

167-20205

12”