ATV-UTV

These Master Clutch Service Tool Kits include all of the specialty clutch tools required to pull your clutch and service it, including the tools to breakdown the spider and compress the springs. They make the perfect addition to any shop. See page 17 for proper Belt Removal Tool application and match Part # to the description below. Master Clutch Service Tool Kit for UTV

CLUTCH VENT KIT for 800 RZR/RZR-S/RZR-4

#167-20318

These vents can be installed anywhere you need to create more air to flow. The frame is flexible to contour to a variety of surfaces and utilizes a special pre-filter material that repels water and keeps dirt out yet maintains high airflow. Sold in a set of 2 vents. Frame dimensions are 6" x 2" with vent area 5 1/4" x 1 1/4".

Description

Secondary Clutch Style TEAM Tied (includes 167-20217) B.O.S.S. (includes 167-20306)

Part#

Description Part# CLUTCH VENT KIT FOR 800 RZR/RZR-S/RZR-4 167-67108

2015 & Older RZR 900/1000

167-20317

2016 & Newer RZR 900/1000, 2017 Ranger XP 1000, 2017-18 Ranger Crew XP 1000, General 1000, General XP and ACE 900

167-20318

2016-20 RZR Turbo*, 2018-22 RS1

Turbo

167-20319

*Will not fit 2020-22 RZR Pro XP Turbo or 2021-22 XP Turbo Models.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

This new spring compression tool makes servicing Polaris secondary clutches a breeze. It utilizes a special extremely coarse thread to keep you from “screwing around” with it all day. The special aluminum pilot bushing fits perfectly into the helix to keep the helix centered while you compress the spring. It can be mounted permanently to a bench, clamped in a vice or bolted to our Receiver Hitch Taper Holding Tool. Spring Compressor

The stock tool kit does not include all the necessary tools to remove the clutch cover or replace the belt. The Clutch Cover Removal Tool makes removal and installation of all those hard to reach clutch cover screws on Polaris or Can-Am UTVs a breeze. This SLP exclusive utilizes a magnetic flexible driver and a double headed socket that fits most models. An absolute must for any UTV owner when field tuning, changing a belt or in the garage to service the centrifugal clutch system. Note: Some models will require additional tools to reach the clutch cover and different techniques to remove the clutch cov - er from the UTV. Please inquire for more information. Clutch Cover Removal Tool for UTV's

A Must for every RZR Tool Kit!

Slide Block Secondary

RZR Turbo

Description

Socket Sizes

Part#

2008-22 All Models except models listed below

8mm & 3/8" 167-20303 1/4" & 5/16" 167-20311

2016-21 RZR Turbo, RS1, 2018-22 Ranger XP 1000, 2019-22 Ranger Crew XP 1000, 2020-22 RZR/RZR-4 Pro XP Can-Am Commander all models and Maverick up to 2017

Description

Part#

2016-19 ACE, 2016-22 RZR, 2017 Ranger XP 1000, 2017-18 Ranger Crew XP 1000 & General Models with Square Slide Block Secondary

167-20230

8mm & 3/8" 167-20303

2016-20 RZR Turbo, 2018-22 RS1

167-20230

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

6

7